Syringes and Syringe Filters

FilterMAX Syringe Filters, Hydrophilic PVDF, 25mm, 0.45um, case of 1000

Low Protein-Binding PVDF Syringe Filters for HPLC and Biologics Prep Protein binding to the filter membrane skews your results before the sample even reaches the column. FilterMAX Hydrophilic PVDF...

FilterMAX Syringe Filters, Nylon, 13mm, 0.22um, case of 1000

13mm Nylon Syringe Filters for Small-Volume Sample Prep When you're only filtering a small aliquot before injection, a 25mm filter wastes sample in the dead volume. The 13mm format keeps hold-up...

FilterMAX Syringe Filters, Nylon, 25mm, 5.0um, case of 1000

A 25mm nylon syringe filter is the workhorse you reach for when sample volume is small but precision still matters. This 5.0µm membrane removes particulates and microorganisms from your sample before...

FilterMAX Disposable HPLC Syringes, 5ml, Luer Lock , 1000/cs (10 packs of 100)

5mL Luer Lock Disposable Syringes for HPLC Sample Filtration A slip-tip syringe that pops off the filter mid-push costs you sample and cleanup time. These FilterMAX 5mL disposable syringes use a luer...

FilterMAX Syringe Filters, Glass Filter, 25mm, 1.0um, case of 1000

Glass Fiber Syringe Filters for High-Solids Samples Membrane filters clog fast on samples loaded with suspended solids. A pure glass fiber filter has much higher dirt-holding capacity, so it can push...

FilterMAX Syringe Filters, Hydrophilic PTFE, 25mm, 0.22um, case of 500

FilterMAX™ Hydrophilic PTFE Syringe Filters, 25mm, 0.22µm, Case of 500 Standard PTFE filters are hydrophobic and fight you on aqueous samples, forcing extra pre-wetting steps. This FilterMAX™ filter...

FilterMAX Syringe Filters, Hydrophilic RC, 25mm, 0.22um, case of 1000

FilterMAX™ Syringe Filters, Hydrophilic Regenerated Cellulose (RC), 25mm, 0.22µm (1000/cs) Protein-rich or aqueous samples going onto HPLC don't do well with membranes that bind analyte. FilterMAX RC...

FilterMAX Syringe Filters, Hydrophilic, Nylon with Glass Fiber Prefilter, 25mm, 0.45µm, case of 500 (10 packs of 50)

FilterMAX™ Hydrophilic Nylon Syringe Filters with Glass Fiber Prefilter, 0.45µm For samples with visible particulate that would clog a straight membrane filter in a few pulls, a built-in glass fiber...

FilterMAX Syringe Filters, Hydrophobic PTFE, 25mm, 0.22um, case of 1000

FilterMAX™ Syringe Filters, Hydrophobic PTFE, 25mm, 0.22µm (1000/cs) Organic solvents chew through some membranes, and PTFE is the one that shrugs it off. FilterMAX hydrophobic PTFE filters give you...

FilterMAX Syringe Filters, Hydrophobic PVDF, 25mm, 0.22um, case of 1000

FilterMAX™ Syringe Filters, Hydrophobic PVDF, 25mm, 0.22µm (1000/cs) PVDF strikes a middle ground: solvent-friendly like PTFE, but with a low-extractable membrane that plays nicely with HPLC and LCMS...

FilterMAX Syringe Filters, Nylon with Glass (GF) Prefilter, 25mm, 0.22um, case of 1000

Nylon Syringe Filters with Glass Fiber Prefilter for High-Particulate Samples Loading a heavily particulate sample onto a plain 0.22µm membrane clogs it fast, and you end up burning through filters...

FilterMAX Syringe Filters, Polypropylene, 25mm, 0.45um, case of 1000

Polypropylene Syringe Filters Built for Solvent-Heavy Sample Prep Some sample matrices eat through membrane materials that aren't built for organic solvents, and a filter that partially dissolves...