Syringes and Syringe Filters

FilterMAX™ Syringe Filters, Nylon, 25mm, 0.45um, case of 1000

PFAS-Free Nylon Syringe Filters for Clean HPLC Sample Prep A syringe filter that bleeds color additives or retains your analyte is going to cost you a rerun, or worse, a bad result you don't catch in time. FilterMAX Nylon Syringe Filters are...

FilterMAX™ Syringe Filters, Hydrophobic PTFE, 13mm, 0.22um, case of 1000

13mm PTFE Syringe Filters for Small-Volume Solvent and Gas Filtration Hydrophobic PTFE syringe filters are the go-to choice when your samples involve solvents or gases rather than aqueous solutions. These FilterMAX filters are injection-molded for...

FilterMAX™ Syringe Filters, Hydrophilic PTFE, 30mm, 0.45um, case of 1000

30mm Hydrophilic PTFE Syringe Filters — 0.45µm, Aqueous and Solvent Compatible Standard PTFE membranes repel water on contact, which is a problem the moment your sample isn't a pure organic solvent. FilterMAX Hydrophilic PTFE filters are...

FilterMAX™ Syringe Filters, Nylon, 25mm, 0.22um, case of 1000

0.22µm Nylon Syringe Filters — Clean Sample Prep for HPLC and LCMS A syringe filter that bleeds additives or retains your analyte costs you a rerun, or worse, a bad result you don't catch until later. FilterMAX Nylon Syringe Filters are...

FilterMAX™ One-step Autosampler Filter Vials with Hydrophobic PTFE Membrane 0.22um, Case of 1000 (10 packs of 100)

One-Step Filter Vials That Cut Out the Separate Syringe Filter Entirely Skip the syringe and separate filter altogether. These FilterMAX one-step autosampler filter vials let you load, filter, and inject in one motion, cutting down on waste and prep time...

FilterMAX™ Syringe Filters, PES, 25mm, 0.45um, case of 1000

Low-Binding PES Syringe Filters for Protein and Biologics Prep Protein-rich and aqueous samples have a way of clogging filters that aren't built for them, costing you time and sample. FilterMAX PES syringe filters use a low-protein-binding...

FilterMAX™ Syringe Filters, Hydrophilic PTFE, 25mm, 0.45um, case of 1,000

Aqueous samples need a membrane that wets out fast and filters clean, without leaching anything into your sample. FilterMAX hydrophilic PTFE syringe filters are precision injection-molded for consistent dimensions, so every filter performs the same as...

FilterMAX™ Syringe Filters, Hydrophobic PTFE, 25mm, 0.45um, case of 1000

25mm PTFE Syringe Filters Built for Organic Solvents Aqueous-rated filters fail fast when you push organic solvents through them. FilterMAX Hydrophobic PTFE Syringe Filters are built specifically for solvent compatibility and gas venting, with...

FilterMAX™ Syringe Filters, Nylon with Glass (GF) Prefilter, 25mm, 0.22um, case of 1000

Particulates in your sample mean a clogged column or a ruined injection, and nobody has time for that. These FilterMAX syringe filters pair a hydrophilic nylon membrane with a glass fiber prefilter, so particulates get caught before they ever reach the...

FilterMAX™ Syringe Filters, PES, 25mm, 0.22um, case of 1000

Protein-rich and aqueous samples have a way of clogging filters that aren't built for them, costing you time and sample. FilterMAX PES syringe filters use a low-protein-binding polyethersulfone membrane that lets aqueous samples pass cleanly, so your...

FilterMAX One-step Autosampler Filter Vials with NYLON Membrane 0.45um, Case of 1000 (10 packs of 100)

Syringe filters are slow, wasteful, and one more consumable you have to keep stocked. FilterMAX one-step filter vials let you load your sample, squeeze the two halves together, and go straight to HPLC -- no syringe, no separate filter, no extra waste...

FilterMAX™ Syringe Filters, Hydrophilic PVDF, 25mm, 0.45um, case of 1000

Low Protein-Binding PVDF Syringe Filters for HPLC and Biologics Prep Protein binding to the filter membrane skews your results before the sample even reaches the column. FilterMAX Hydrophilic PVDF Syringe Filters resist protein binding and broad chemical...