Product Description
Yamato DN-611IE Inert Oven, 223L 220V
SHIPS VIA FREIGHT (charges apply)
Description
Inert ovens suitable for temperature test and heat treatment in a non-oxidizing environment, by introducing N gas into the chamber
Features
Performance and functions
- Heat resistance test and heat treatment of up to 360°C
- Simple operation by interactive key input
- Standard equipped with various operation modes such as program operation and calibration offset function, power failure recovery mode selection, and user configuration information saving
- Repeatable operation function up to maximum 99 steps, 99 patterns controller with repeat function
- N gas flow amount controllable
Safety features
- Enhanced safety countermeasure, including self-diagnostic functions, digital setting, independent overheat prevention device and electric leakage breaker
- In case of door opening during operation, fan and heater turn OFF by door switch
Specifications
| MODEL | DN611IE |
| System | Forced Convection |
| Operating Temp. Range | Room Temp. +15 to 360°C |
| Temp. Adjustment Accuracy | ±0.2°C (at 360°C) |
| Temp. Fluctuation | ±0.6°C (at 360°C) |
| Temp. Uniformity | ±3°C (at 360°C) |
| Temp. Gradient | 20°C(at 360°C) |
| Max. Temp. Reaching Time | ~60 min. |
| Nitrogen Substitution Time Required | ~70 min. (ordinary temp with oxygen concentration of 2%) |
| Interior | Stainless steel plate |
| Exterior | Cold rolled steel plate with baked melamine resin coating |
| Heat Insulator | Glass wool + Ceramic fiber |
| Heater | SUS Pipe Heater 4.0kW |
| Sensor | K thermocouple for temperature control and independent overload prevention device |
| Fan Type / Motor | Sirocco Fan / Condenser Type |
| Flow Meter, Gas Carrier | Max. Flow 30L/min, O.D. 9mm Hose Nipple |
| Temp. Controller | PID Control by microcomputer |
| Temp. Display Type | Temp. display: Digital display by 4 digit green LED (resolution:1°C) Setting temp. display: Digital display by 5 digit orange LED (resolution:1°C) |
| Timer / Timer Resolution | 1min. ~ 99hrs. 59mins. or 100hrs. ~ 999hrs. / 1min. or 1hr. |
| Operation Function | Fixed temp. operation, Auto-start, Auto-stop, Quick auto-stop, Program Operation |
| Program Mode | Repeatable operation function up to max 99 steps or 99 patterns. |
| Additional Functions | Power on and operation time integrating function (up to 65535 hours), calendar time (24 hours), calibration offset, Monitor display of integrated power consumption, total CO emissions and heater operating output, power failure recovery mode, save and read out of user settings |
| Heater Circuit Control | Triac with Zero-cross |
| Safety Device | Self diagnostic functions (Sensor failure, SSR short circuit, Heater line disconnection, Main Relay contact damaged, Automatic overheat prevention), Key lock function, Independent overheating prevention, Electric leakage breaker, Door switch |
| Internal Dimensions WxDxH | 620 x 600 x 600 mm |
| External Dimensions WxDxH | 790 x 845 x 1065 mm |
| Internal Capacity | 223L |
| Shelf Max. Load | ~30kg / shelf |
| Shelf Support Qty. / Pitch | 17pcs. / 30mm |
| Power Source | Single phase 220V 19A (no plug, round terminal) |
| Weight | ~130kg |
| Shelf Plate / Bracket | Stainless wire, 2 pcs. / 4 pcs. |
