VialMAX™

VialMAX™ Limited volume micro-insert for 2mL vials, spring bottom, borosilicate glass, 250ul, 1,000/cs

Losing half your sample to dead volume defeats the purpose of running a limited-volume method in the first place. VialMAX micro inserts use a spring-bottom design and high-quality borosilicate glass...

VialMAX™ 2mL INTERNALLY SILANIZED Amber Autosampler Vials with Writing Area, case of 1000 vials (10 packs of 100)

A bad vial can ruin a perfectly good sample, and a re-run costs a lot more than the vial ever did. VialMAX internally silanized amber vials are built with longer threading than most, so the cap seals...

VialMAX™ Screw-caps for 2mL Autosampler Vials, RED, Case of 1000 (10 packs of 100)

A cap that doesn't seal right means evaporation, contamination, or a leaky vial in your autosampler tray, none of which you want to discover mid-run. VialMAX screw caps come with the septa...

VialMAX™ Screw-caps for 2mL Autosampler Vials, YELLOW, Case of 1000 (10 packs of 100)

A cap that doesn't seal right means evaporation, contamination, or a leaky vial in your autosampler tray, none of which you want to discover mid-run. VialMAX screw caps come with the septa...

VialMAX™ 15-425 Screw Cap for 4mL and 8mL vials with Pre-assembled Red PTFE/White Silicone Septa, Closed Top, case of 1,000

A loose or low-purity septum is how solvent evaporates out and air gets in, right when you need a clean, repeatable injection. VialMAX closed-top screw caps come with a high-purity red PTFE/white...

VialMAX™ 8ml Clear Glass Vial, 15-425 Screw top, case of 1,000

Cheap glass leaches, clouds, and reacts with the wrong sample at the wrong time. VialMAX 8mL clear vials are made from Type I Class A borosilicate glass for maximum chemical resistance and purity,...

VialMAX™ 20mL Crimp-top Headspace Vials (23 x 75mm), FLAT Bottom, case of 800 (8 packs of 100)

Headspace work demands a vial that seals perfectly under pressure every single time, because a slow leak doesn't just ruin one run, it throws off your whole calibration curve. VialMAX 20mL crimp-top...

VialMAX™ 300uL Clear Polypropylene (PFAS-free) Autosampler Vials, case of 1000 vials (10 packs of 100)

Glass isn't always the answer, especially when you're running aqueous samples and don't want to pay for breakage. These VialMAX 300uL clear polypropylene vials are PFAS-free, graduated for quick...

VialMAX™ Screw-caps for 2mL Autosampler Vials, GREEN, Case of 1000 (10 packs of 100)

A cap that doesn't seal right means evaporation, contamination, or a vial that pops open mid-run. VialMAX green screw caps for 2mL autosampler vials come with a red PTFE/white silicone septa...

VialMAX™ 11mm Snap Caps, Red PTFE/White silicone septa, 1000/cs

Snap caps need to actually snap into place and stay sealed, not pop loose halfway through a rack. VialMAX 11mm snap caps come with a red PTFE/white silicone septa preassembled, giving you a clean,...

VialMAX™ GREEN Pre-slit Screw-caps for 2mL Autosampler Vials, Case of 1000 (10 packs of 100)

A septa that cores or fragments under a needle strike contaminates your sample and clogs your system. VialMAX green pre-slit screw caps for 2mL autosampler vials come with a PTFE/silicone septa...

VialMAX™ Screw-caps for 40mL EPA VOA Vials, Closed, 600/cs

EPA VOA work has zero tolerance for a cap that leaks volatiles before you even get the sample to the lab. VialMAX screw caps for 40mL EPA VOA vials come with a natural PTFE/natural silicone septa for...