FilterMAX™

FilterMAX™ Syringe Filters, Nylon, 25mm, 5.0um, case of 1000

A 25mm nylon syringe filter is the workhorse you reach for when sample volume is small but precision still matters. This 5.0µm membrane removes particulates and microorganisms from your sample...

FilterMAX Disposable HPLC Syringes, 10ml, Luer Lock , 1000/cs (10 packs of 100)

10mL Luer Lock Disposable Syringes for Larger-Volume Filtration When you're filtering more than a vial's worth, refilling a small syringe over and over slows the whole prep line down. FilterMAX 10mL...

FilterMAX Disposable HPLC Syringes, 5ml, Luer Lock , 1000/cs (10 packs of 100)

5mL Luer Lock Disposable Syringes for HPLC Sample Filtration A slip-tip syringe that pops off the filter mid-push costs you sample and cleanup time. These FilterMAX 5mL disposable syringes use a luer...

FilterMAX Disposable HPLC Syringes, 3ml, Luer Lock , 1000/cs (10 packs of 100)

3mL Disposable Syringes Built for Clean HPLC Sample Handling A syringe with a rubber plunger tip can leach silicone or oil into your sample before it ever reaches the filter. These disposable 3mL...

FilterMAX™ Syringe Filters, Glass Filter, 25mm, 1.0um, case of 1000

Glass Fiber Syringe Filters for High-Solids Samples Membrane filters clog fast on samples loaded with suspended solids. A pure glass fiber filter has much higher dirt-holding capacity, so it can push...

FilterMAX™ Syringe Filters, Nylon, 13mm, 0.22um, case of 1000

13mm Nylon Syringe Filters for Small-Volume Sample Prep When you're only filtering a small aliquot before injection, a 25mm filter wastes sample in the dead volume. The 13mm format keeps hold-up...

FilterMAX™ Syringe Filters, Polypropylene, 25mm, 0.45um, case of 1000

Polypropylene Syringe Filters Built for Solvent-Heavy Sample Prep Some sample matrices eat through membrane materials that aren't built for organic solvents, and a filter that partially dissolves...

FilterMAX™ Syringe Filters, Nylon with Glass (GF) Prefilter, 25mm, 0.22um, case of 1000

Nylon Syringe Filters with Glass Fiber Prefilter for High-Particulate Samples Loading a heavily particulate sample onto a plain 0.22µm membrane clogs it fast, and you end up burning through...

FilterMAX One-step Autosampler Filter Vials with NYLON Membrane 0.45um, Case of 1000 (10 packs of 100)

Syringe filters are slow, wasteful, and one more consumable you have to keep stocked. FilterMAX one-step filter vials let you load your sample, squeeze the two halves together, and go straight to...

FilterMAX™ Syringe Filters, Hydrophilic, Nylon with Glass Fiber Prefilter, 25 mm, 0.45 µm, case of 500 (10 packs of 50)

FilterMAX™ Hydrophilic Nylon Syringe Filters with Glass Fiber Prefilter, 0.45µm For samples with visible particulate that would clog a straight membrane filter in a few pulls, a built-in...

FilterMAX™ Syringe Filters, Hydrophilic PTFE, 25mm, 0.45um, case of 1,000

FilterMAX™ Hydrophilic PTFE Syringe Filters, 25mm, 0.45µm, Case of 1,000 When you're filtering higher-particle or higher-flow samples and don't need the tighter 0.22µm cutoff, a 0...

FilterMAX™ Syringe Filters, Hydrophilic PTFE, 25mm, 0.22um, case of 500

FilterMAX™ Hydrophilic PTFE Syringe Filters, 25mm, 0.22µm, Case of 500 Standard PTFE filters are hydrophobic and fight you on aqueous samples, forcing extra pre-wetting steps. This...